Three phase, enhanced performance cast aluminum and
cast iron, premium efficient IEC frames with Design B
torque characteristics.
Features a multi-mount arrangement
incorporating bolt on feet* with flange mount configurations
available. 2, 4 and 6 pole, 0.75 to 160kW, ideal applications
including packaging, conveying, blowers, etc.
Motor Features
STANDARD FEATURES
*Removable feet F1, F2, F0 field convertible up to and including 225 frame (standard F0)
1.15 Service Factor with 60Hz operation / 1.0 Service Factor with 50Hz operation
36 Month warranty
Conduit Box is 90º rotatable
B5/B14 and increase/decrease flanges available
Class I, Division II, Groups A, B, C and D compliant
IEEE 45 Marine Duty 160M frame and larger
Anti-microbial (tropicalization) on stator winding
Cast iron fan covers standard 160M frame and larger
Regreasable bearings 160M frame and larger
Mobil Polyrex EM polyurea grease
1045 Steel shaft
Surface finish:
2-part epoxy coating (cast iron models only)
Alkyd enamel RAL7024 - Graphite Gray
Black oxide surface treatment for increased corrosion resistance (aluminum models only)
Stainless steel nameplate
Corrosion resistant hardware
Metric threaded cable gland included with motors
Ultra high strength, reusable lifting straps included with motors 160M frame and larger
OPERATING PARAMETERS
Continuous (S1) duty
Ambient temperatures up to 40ºC
Installation up to 1000 MASL (3300 ft.)
CONNECTION
Up to and Including 132M Frame (IEC standard terminal block):
6-Lead 460V or 575V single voltage delta connection
INGRESS PROTECTION
The standard degree of enclosure protection is IP55 (increased
IP protection is available). Both drive end and non-drive end are
fitted with double lip oil seals, including a rubber shaft slinger on
the drive end. Terminal box is double gasketed including nipple
seals between conduit box and stator body. DE and NDE end
bell fitted with sintered brass one-way drain.
INSULATION AND INVERTER RATING
Class F Insulation (Impregnation resin, magnet wire and insulation materials are Class H)